Supervised industrial racking installation in a high-bay warehouse
Assembly & Installation

Racking Installation Services

Engineered racking installation for pallet, cold-storage and automated warehouse projects across South America — supervised, documented and aligned with local project requirements.

Automated steel racking production equipment used for warehouse installation projects
Manufacturer-Supervised Installation

Racking Installation with Full Engineering Accountability

Alohatop Shelf LLC delivers racking installation for distribution centres, cold stores, 3PL warehouses and manufacturers across South America. Our installation scope is linked to the approved structural design, bill of materials and site conditions — not separated from the engineering that determines safe capacity.

Overseas buyers receive a single technical pathway from layout study and seismic review to component delivery, site assembly and documented handover. Where local partners are involved, work is controlled through approved method statements, supervisor checklists and the same component traceability used in production.

  • Pre-installation review of slab condition, clear height, access routes, unloading, fire services and operational constraints.
  • Code-aware planning for seismic zones, cold-store temperatures and automated equipment tolerances.
  • Handover documentation confirming component identification, anchorage checks, beam locks and load signage.
5-year system warranty ISO-managed production Seismic-aware assembly Cold storage experience
Installation Method

A Four-Stage Installation Process Built for International Buyers

Clear scope, local requirement checks and documented completion reduce site surprises for overseas procurement, logistics and engineering teams.

01

Technical Mobilisation

Approved drawings, load schedules and component lists are checked against the delivery plan. Site access, unloading space, lifting equipment and safe work areas are confirmed before assembly.

02

Local Requirement Review

Destination country requirements are reviewed with the buyer and appointed local engineer, including seismic parameters, fire access, permits and any site-specific installation restrictions.

03

Supervised Assembly

Frames are plumbed, beams locked, anchors installed to the approved plan and safety accessories fitted. Deviations are recorded and resolved before loading begins.

04

Inspection & Handover

Final checks cover structural alignment, anchor condition, row spacers, upright protection and load signage. Handover documents support safe operation and future inspections.

Installation Scope

Warehouse Racking Systems We Assemble and Commission

From conventional selective racking to dense and automated structures, installation follows the same discipline: correct components, correct tolerances, documented safety checks.

Pallet Storage

Selective, VNA and High-Bay Racking

Assembly of selective, double-deep, very narrow aisle, drive-in, pallet flow, push-back and pallet shuttle systems for palletised inventory.

  • FocusAccess, density, throughput
  • Site checksClear height and floor tolerance
Automation

Automated and Self-Supporting Structures

Rack structures for AS/RS, miniload, shuttle and clad-rack buildings, installed to the tolerances required by stacker cranes and automation integrators.

  • IntegrationStacker cranes and shuttles
  • AccuracyAutomation-grade tolerances
Cold Chain

Cold Storage and Freezer Racking

Installation planning for refrigerated and freezer warehouses, including material handling at low temperature, access control and finishes suited to continuous cold operation.

  • EnvironmentRefrigerated and freezer rooms
  • FocusCold-store uptime and safety
Picking

Picking, Mezzanine and Raised Walkways

Medium-duty shelving, carton flow, multi-tier picking and raised walkways assembled for safe order-picking and inspection access.

  • SystemsShelving, carton flow, mezzanine
  • FocusPick speed and safe access
Seismic Zones

Seismic Anchoring and Bracing

Anchor layouts, row spacers, bracing and base-plate checks reviewed against the project seismic design requirements and site conditions.

  • Design reviewLocal seismic references
  • ChecksAnchors, bracing, base plates
Expansion

Relocation and Reconfiguration

Adding levels or bays, relocating existing frames and integrating new components after technical inspection of the current installation.

  • Project typeExpansion and relocation
  • BasisInspection before reuse
Code Awareness

Local Code Awareness for South American Installations

Final structural design remains the responsibility of the appointed engineer for each project. Our installation planning takes the project location and buyer-provided design criteria into account so that site work supports the approved calculation.

MarketTypical design and review referencesInstallation considerations
ChileNCh2369, NCh433 and project specificationsSeismic bracing, anchor verification, cold-chain fruit and seafood facilities.
PeruE.030 and project specificationsAgro-export cold stores, port-driven distribution centres and high-density pallet storage.
ColombiaNSR-10 and project specificationsDistribution hubs, food and beverage warehouses, and seismic-resistant layouts.
BrazilABNT NBR 15524 where applicable, plus project specificationsPBR pallet formats, high-humidity environments and multi-client 3PL operations.
ArgentinaINPRES-CIRSOC 103 for seismic regions, plus project specificationsFood, beverage and automotive supply chains, with specific review for western seismic zones.
Ecuador, Uruguay and ParaguayNational requirements, free-zone rules and project specificationsCold-chain facilities, regional distribution centres and industrial park installations.
All marketsApproved structural drawings, site survey and local engineer verificationAnchors, beam locks, plumb and level, row spacers, protectors and load signage.

Codes listed are indicative references for early planning. The final design, permits and installation method must be confirmed by the appointed local engineer and authorities for each project.

Industrial steel racking quality control before warehouse installation
Quality & Safety

Installation Controls That Protect People, Stock and Uptime

Racking failures often begin with small site deviations: missing beam locks, incorrect anchors, damaged uprights or unrecorded modifications. Our installation method closes these gaps through supervised checks and handover evidence.

  • Verified component identification against drawings and delivery records.
  • Anchor and base-plate inspection before rack loading.
  • Beam safety locks, row spacers, protectors and load signage checked at completion.
  • Site-specific risk assessments and method statements for occupied warehouses.
ISO 9001 ISO 45001 EN 1090-1 ISO 3834-2 5-year warranty Component traceability
Support Services

Engineering and Inspection Support Around Installation

Our installation service can be combined with technical review, rack inspection and maintenance planning to protect long-term warehouse safety.

Project Engineering Review

Layout, load and seismic design review before installation so that site work follows a buildable, approved solution.

Technical Rack Inspection

Condition checks for existing racking before expansion, relocation or continued use in high-turnover warehouses.

Maintenance and Reconfiguration

Replacement, protection upgrades and layout changes that keep racking safe as storage demand evolves.

FAQ

Racking Installation Questions from Overseas Buyers

For project-specific advice, contact our team at [email protected].

Do you provide racking installation in South America?

Yes. Alohatop Shelf LLC supports racking installation projects across South America through engineering supervision, approved installation methods and coordination with trained local partners where the project requires them. The scope can cover pallet racking, picking systems, cold-store racking and automated warehouse structures.

What information is needed to review an installation project?

Provide a building layout with clear height, pallet dimensions and maximum load, number of SKUs and pallet positions, daily throughput, forklift or automation type, temperature range, destination city and target schedule. Send this information to [email protected] for an initial installation review.

How are seismic requirements handled during installation?

The installation plan follows the approved structural design and the project engineer's seismic assumptions. Depending on the destination, relevant references can include NCh2369 and NCh433 in Chile, E.030 in Peru, NSR-10 in Colombia, NEC in Ecuador and INPRES-CIRSOC 103 in Argentina. Installation checks cover bracing, base plates, anchors, row spacers and tolerances.

Can racking be installed in an operating warehouse?

Yes, when the site allows safe phasing. The work method should define barriers, forklift routes, exclusion zones, unloading windows and emergency access. For live operations, night shifts or phased bay-by-bay installation can be evaluated to reduce disruption while keeping safety controls in place.

What is included in installation handover?

Handover typically documents component identification, level and plumb checks, beam lock verification, anchor and base-plate checks, safety accessory installation, load signage and any approved deviations. This supports safe operation, maintenance planning and future technical inspection.

What warranty and quality references support the installation?

Storage systems can be supported by a 5-year warranty, component traceability and production under references such as ISO 9001, ISO 14001, ISO 45001, ISO 50001, UNE EN ISO 3834-2 and EN 1090-1. The final project documentation should always be confirmed for the specific scope and destination.

Warehouse racking engineering team reviewing installation documents
Start Your Installation Review

Planning a Racking Installation in South America?

Send your building layout, pallet and load data, destination city, target schedule and any known seismic or cold-store requirements. Our team will review the installation approach and information required for a clear project proposal.

Contact Us