Pallet Live Rack Push Back Pallet Rack

Product Description

Push-back pallet rack for high density warehouse storage

Products Description

Push-back pallet rack is for high density storage. The depth is usually within 5 pallet positions. The rack takes β€œfirst-in-last-out (FILO)” access mode.

Characteristics

  • Applicable to warehouses with high cost per unit area, such as cold storage, warehouses in prime locations in downtown, etc.
  • Provides 20%–30% selectability.
  • Both safety and operating efficiency are higher than drive-in racks (drive-through racks).
  • Compared with adjustable pallet racking, it increases the utilization rate of the ground by about 60%.
  • It can be used with a reach forklift or a counterbalanced forklift, and the forklift operation requirements are lower than drive-in pallet rack.

Components

The main components are upright frames, beams, support rails, and carrying carts. The rack has a bolted structure and is easy to dismantle and install in a new place.

Push-back pallet rack structure and components
Middle cart for push-back pallet rack

Middle Cart

Made of square tube. To save cost, the structure can be as simple as shown above. Each cart has 8 bearings. Designs can be different based on clients' needs.

Small cart or first cart for push-back pallet rack

Small Cart or 1st Cart

Made of angle steel and square tube. To save cost, the structure can be as simple as shown above. Each cart has 8 bearings. Designs can be different based on clients' needs.

Protect rail for push-back pallet rack

Protect Rail

Made of C-shaped or U-shaped steel. When the ground level needs no carts and pallets are placed directly on the ground, a protect rail is recommended.

Product Information

Rack Type
push back pallet rack
Rack Cost
Low, Medium Low, Medium, βœ“ Medium High, High, Higher
Pick-up Mode
first in, last out (FILO)
Structure
knock down or bolted
Forklift Aisle
around 3200mm, depends on customer's forklift parameter
Load Capacity & Dimension
Load capacity
≤1500 kg/pallet
Size
customized based on clients' pallet
Components
Core components
frame (upright, also called column or post, bracing, base plate, fasteners), beam, support rail, cart, spacer
Other
upright protector, frame protector, guide rail, protect mesh
Core Components Specification
Upright (mm)
80*60, 90*60, 90*70, 100*70, 120*95, 120*135
Beam (mm)
80*50, 100*50, 110*50, 120*50, 130*50, 140*50, 160*50
Finish
Epoxy resin electrostatic spraying (powder coating), galvanized
Coating thickness
no less than 60um for average thickness for powder coating
Material
Q235B, or Q355
Color
RAL5015 (sky blue), RAL5005 (signal blue), RAL2004 (pure orange), RAL1003 (signal yellow), RAL7035 (light grey). Customized colors are available when order above 2 Γ— 40GP containers.

Store & Withdraw

Loading

Carrying cart runs along the inclined support rail. The 1st pallet is placed on the carrying cart; the 2nd pallet pushes the 1st pallet back into the rack; the 3rd pallet pushes the front 2 pallets into the rack; the rest follow the same operation.

Unloading

The pallet at the pick-up end is carried out first; the next pallet slides to the pick-up point by gravity for unloading; the others follow the same operation.

Unlike drive-in pallet rack, forklift trucks do not drive into the rack.
Loading and unloading operation of push-back pallet rack
Push-back pallet rack application 1
Push-back pallet rack application 2
Push-back pallet rack application 3
Push-back pallet rack application 4
Push-back pallet rack application 5
Push-back pallet rack application 6
Push-back pallet rack application 7

Our Services

HBrack warehouse rack services

Packaging & Shipping

To suit different clients' needs, HBrack uses different packing methods. The following rules are followed:

  • For container orders: stretch film + carton board + packing belt + plywood stick + plywood pallet leg.
  • For less than container orders: plywood box or other packaging that can keep the product safe during transportation.
  • Other: based on clients' needs, such as vacuum packing, etc.
Push-back pallet rack packaging detail 1
Push-back pallet rack packaging detail 2

Buying Guides

Push-back pallet rack buying guide 1
Push-back pallet rack buying guide 2

Company Information

Nanjing Hongbo Metal Products Co., Ltd. (hereafter mentioned as HBrack) is a company full of vitality. It is committed to providing clients with better metal products and service. HBrack has designers who have been in warehouse rack design for more than 10 years. They have rich experience in complex structures. The products provided include adjustable pallet racking, shelving, cantilever racking, drive-in racking, mezzanine floor, live racking, drawer racking, stacking rack, wire container, steel pallet, steel cage and other warehouse storage related products. The services provided include storage rack design, producing and installation. The product done ranges from common pallet rack to complex mezzanine floor.

Nanjing Hongbo Metal Products Co., Ltd. HBrack
HBrack warehouse rack product and contact information

FAQ

Are you a factory or a trading company?

We are a factory and also do trading products related to warehouse rack.

Do you provide samples? Are they free or extra?

We provide sample parts free of charge and you just need to pay the freight. When a whole sample rack is needed for testing the possibility, please contact us for sample cost.

I'd like to visit you. Which city should I go to?

We are in Nanjing. When needed, we can help you book a hotel and traffic tickets. We will pick you up at the destination. Our sales person and driver will be with you during the visit, so you do not have to worry about traffic.

Why choose HBrack?

1. HBrack has engineers who are professional in warehouse rack design for more than 10 years and can handle simple to complex structures.

2. Your money is safe with HBrack. We accept trading through a third party. Our sales persons have rich experience in warehouse racks, and all personal information is trackable.

3. HBrack offers different designs to help clients control budget.

What is the load capacity and size of the push-back pallet rack?

Load capacity is ≤1500 kg per pallet, and size is customized based on the client's pallet.

What is the pick-up mode and typical forklift aisle?

The rack uses first in, last out (FILO) access. The forklift aisle is around 3200 mm, depending on the customer's forklift parameters.

Related Products